Home Inspection With New Construction – You could believe that a home inspection isn’t necessary if you had the house built from the ground up to your specifications.
Is it going to be a waste of your time and money? Depending on how you look at it.
A home inspection can provide important insights into the property’s construction as well as the opportunity to save costly repairs later on. Even brand-new homes have problems.
What Is a Home Inspection?
A home inspection is a third-party assessment of a home’s construction, systems, and other important elements. The inspector will inspect your home and provide you with a report on their findings. You can then approach the seller (in this case, the builder) to resolve any issues before closing on the house.
Common Issues Found in New Homes
It would appear that new homes should be ideal, or near to it, yet many people claim that they frequently contain hidden flaws. Structural faults such as foundation fractures, incorrect grading, and poor framing are some of the most prevalent issues discovered during new-construction home inspections.
Drainage and grading difficulties might be problematic since they can lead to water damage in the future. Windows may leak. There could be HVAC problems, such as broken thermostats or faulty connections.
Inspectors say they frequently discover unfinished construction. These could include a lack of insulation, handrails, partially installed fixtures, or even missing hardware.
How Many Inspections Do You Need?
It’s a good idea to have two or three inspections done on the property. Three categories are quite common and should be avoided.
1. The Foundation Inspection
A foundation examination, often known as a “pre-pour,” is performed right before the foundation is poured. It guarantees that the site has been properly excavated and graded, and that all anchors and footings are properly spaced and in position.
2. The Framing Inspection
The inspector can ensure that beams, posts, studs, and other structural components are properly installed. They can inspect the wiring, plumbing, window flashing, and other faults that will be hidden behind walls later. If any problems arise, your builder can remedy them before proceeding with the project.
3. The Final Inspection
The third and final examination is the same as with any other resale property. It ensures the safety of the home. It was completed in accordance with local building codes and requirements.
Anything your inspector discovers at this time should be addressed by your builder before to closing.
What New Home Inspectors Look For
In each level, home inspectors examine a variety of features. They will also consider the local building code, which can differ from city to city or county to city or county to city or county to city or county to city or county to city or county to city or county to city or Most inspectors will look at drain, waste, and vent lines during the pre-pour inspection when examining a freshly built home. Water lines, plumbing, pipes, trenches, soil, elevation, drainage, and grading will also be examined.
Beams, bearings, and other framing items are examined during the frame examination. It addresses stairwells, leaks, water intrusion, and mold concerns, as well as nails, screws, studs, and plates. It searches for issues with fire blocking and draft stopping, plumbing and wiring, and HVAC and ducting.
You can get a jump start on your home purchase by scheduling a new-construction home inspection. On a resale home, you can only check it after the fact. In that instance, all you can do is rectify or conceal the problem. A timely examination allows your builder to get to the bottom of the issue. They can fix it before the construction begins.
Thinking about BUYING or SELLING a Home,
Richi Khanna can help you and if you have any questions in regards to real estate, then you must call Me today! at
What Are You Waiting For?
CALL RICHI NOW!